Frequently Asked Questions
What are the styles and sizes of
your Corian / Solid Surface
cutting boards?
Corian Cutting Boards by Lifetime are
available in 3 styles and in Classic
or Designer Colors. They measure .05 thick.
Sizes are as followed:
Double Handle 12 x 24
Fry Pan Handle 10 x 18
Single Handle 10 x 18
**Each Lifetime Cutting Board comes with a drip rail unless otherwise specified.
What is Corian / Solid Surface material?
Corian solid surface material used to manufacture Lifetime Cutting Boards is an extremely durable, engineered inert product of composed acrylic polymer and alumina trihydrate. The product has a color and pattering consistency throughout the thickness of the material which allows scratches and stains to be removed with the application of light abrasives.
Why is a Corian cutting board better than a wood cutting board?
Unlike wooden cutting boards, the Corian Cutting Boards by Lifetime are nonporous and resistant to stains, odors, bacteria and germs. Food, bacteria, germs, etc. cannot and will not be absorbed by the solid surface Corian cutting board.
Will my Corian Cutting Board absorb bacteria?
No, Corian and Solid Surfacing are totally non-porous and cannot absorb foreign entities.
Will my Corian cutting board dull my knife?
Since Lifetime Cutting Boards are made from material which is not as hard as a Knife blade, the board surface will not dull the blade anymore than a hardwood cutting board. One of the properties of this material is that it is much easier on knives than other surfaces such as wood or plastic.
Will my Corian cutting board scratch?
Depending on the frequency of use, the cutting board surface may scratch over time. This is normal and can be corrected by using common over-the-counter maintenance products.
Will my Corian cutting board stain?
No! Because Corian and solid surfacing is non-porous, even if you get a stubborn spot on it that will not come off with soap and water, you can easily remove it with “Clorox Clean-up.”
Will my Corian cutting board show marks with use?
Yes, as with any surface you may notice small scratches (especially on dark colors) however Corian and solid surfacing is totally renewable and small scratches can be removed using "Soft Scrub" cleanser and a "Scotch-Brite" pad. For more stubborn marks you can use a high grit (220-320) sandpaper followed by fine (0000) steel wool to restore the finish.
How do I maintain the “like-new” appearance of my solid surface cutting board?
Your Lifetime Cutting Board requires very little care to maintain is “like-new” appearance. Small scratches can be removed using a “Soft Scrub” cleanser as a wetting agent and a “Scotch-Brite” abrasive pad to buff out minor scratch marks. Deep scratch marks can be generally removed with a 220-3 grit sandpaper followed by 0000 stainless steel wool. The cutting board should be cleaned with soap and water after any scratch removal process.
Can my Corian cutting board break?
Testing over an extensive period of time has yet to crack or fracture a Lifetime Cutting Board. Yet, as with any material, extreme situations may cause the cutting board to break. HOWEVER, it would have to be a situation where the cutting board was dropped extremely hard for this to occur.
Can I place a hot dish on my Corian cutting board?
Corian and solid surfacing can withstand temperatures of up to 400 degrees with absolutely no ill-effects. Higher temperatures may (but not necessarily) "scorch" the surface – of course then it can be restored with sanding as explained above.
Can my Corian cutting board withstand cold temperatures?
Absolutely! Many people purchase larger boards for use as a pastry board. When placed in the refrigerator to chill, this material will stay cold for quite a while, making it an excellent alternative to marble!
Can I leave my Lifetime Corian Cutting board outside subject to outdoor weather?
Yes. Your Lifetime Cutting Board, as the name implies, is made for a lifetime of practical use both for indoor and outdoor cooking. Exposure to the elements will not adversely affect the durability of appearance of the cutting board.
Can I put my Corian cutting board in the dishwasher?
You can put your cutting board in the dishwasher, however, the rubber feet may come off
due to the heat of drying. Also, it really isn't necessary to wash your board in the dishwasher because of its non-bacterial properties.
How do I clean my Corian cutting board?
All you need to do is wash your Corian cutting board with soap and water. You may choose to use a bleaching cleaner such as "Clorox Clean-up" or "Soft Scrub" cleanser.
Why are Lifetime Cutting Boards generally priced higher than most other solid surface cutting boards for sale?
Unlike other so-called inlayed cutting boards which cut the board surface as little as 1/8” in depth to surface fill the routed void with a contrasting epoxy liquid material to form a so-called “inlayed” design, the Lifetime Cutting Board uses a true inlayed design by cutting through the entire board thickness in order to place a separate solid surface Corian design piece within the board to form a solid “one piece” cutting board. This propriety fabrication method insures not only a board of lasting durability, but one of lasting beauty. Our full size Double Handle Cutting Boards measure 12x24 and feature a drip groove around the surface of the board. Our Single Handle and Pan Handle boards measure 10x18 and come with optional drip grooves. Each cutting board is ½” thick and can be costumed to reduced sizes.
What should I know about your company?
Lifetime Industries is a family owned and operated business that has been in the manufacturing and fabrication business since 1946. It is a licensed fabricator of Corian solid surface material and supplies fabricated solid surface material to national accounts such as the Home Depot and Lowe’s Building Centers. Lifetime Industries has a 60,000 sq. ft. state-of-the-art solid surface fabrication facility in McAllen, Texas.